McClure Classified Ad Listings

Ties scaffolding to a wall Can be used in place of outriggers when safe Adjusts from 4 32 from scaffold structure

Hurricane cage framed machines are designed for ease of operation and protection of the unit parts. Hose reels holding up to 100 feet of 3/8" pressure washer hose can be mounted on the pre-drilled shelf on the front of the frame.

The extended spindle, low-profile cutting head, and flush-mounted blade of this saw allow it to cut all the way against the inner wall of a toe-kick for removing old underlayment. The hinged depth adjustment plate has five settings for common underlayment thicknesses including 1/4", 3/8", 1/2", 5/8", or 3/4". Also includes a clutch mechanism that may disengage to reduce kickback. Comes with No....

The Tele-Boom T200 is recommended for skid steer loaders with a lifting capacity of 1750 lbs. or more. The lift rating is over 1750 lbs. depending on how far you reach. Fully extended, do not expect more than a few hundred pounds due to the leverage produced against yur machine. The 1750 lb. capacity is measured when the boom is fully extended to 20 ft. You can of course pick up more weight wit...

Finishing Nailer is designed to deliver consistent power to drive nails flush.

Hurricane cage framed machines are designed for ease of operation and protection of the unit parts. Hose reels holding up to 100 feet of 3/8" pressure washer hose can be mounted on the pre-drilled shelf on the front of the frame.

Specifically designed for Bobcat(r) machines. Reliable, cost-effective solution to tough trenching jobs. Manual or hydraulic side-shift allows you to work close to walls. Eight models to dig from 2 to 5 ft. deep. Trench widths from 4 to 12 in. wide

Rip and strip finishes on existing floors with ease. Cuts through urethane efficiently and leaves the wood clean and ready for a new finish. Sands in any direction without damaging the grain pattern, and is the best machine for antique floors as it removes far less material than drums so your floors last longer. Far easier to use than traditional drum sanders. Change hook and loop grit disks in...

The Model C Sectional Drain Cleaner is the best unit available for tougher blockages such as tree roots and for longer runs in main sewer lines. The Model C runs up to 200ft. of 1 1/4 dual cables, with self-feeding action, that are available in 8ft. or 10ft. sections for cleaning 3 -10 diameter lines. The standard 1/2HP motor spins the cable at 500 RPM for maximum cleaning power and can be upgr...

Easily lift and move pallets and bulk materials Available only for the Bobcat(r) 3650 utility vehicle

Ideal nailer for installing oak, maple, ash, pine and other similar wood species.

Cuts through asphalt, concrete, frozen ground and wire mesh. Ideal for precise cuts on road repairs and utility installations. Two models: 18- or 24-in. max. dig depths. Wheel widths: 3, 6 and 8 in. Hydraulic side shift

18 blade capacity NEW & Improved throttle cable Easy turn crank, for lowering and raising blades in and out of cut Screw boot belt tensioner prevents frame damage 7-gauge steel blade guard with welded protective segment flap Heavy-Duty lifting bail (optional) 13 HP gasoline engine Heavy-Duty 7-gauge steel laser cut frame Large screw-type depth control Wide-T handles with rubber grips High quali...

Mulches trees and saplings up to 3 in. in size. Short deck with superior oscillation follows ground contours for a superior cut. Lightweight deck can be used on many machine sizes. Dual offset motors provide a clean cut every time. 66 in., 72 in., and 80 in. cutting widths

Ideal for installing fence posts, planting trees or digging footings for new decks. Drills 6 to 48 in. diameter holes quickly and accurately. Choose between direct drive and planetary options. Hangs plumb on uneven terrain

Efficiently sweep driveways, sidewalks, jobsites, parking lots, loading docks and warehouses. Clear light snowfalls. 48, 68 and 84 in. widths. Angles up to 30 degrees left or right

The Model K is a professional quality, manual unit for cleaning 1 1/4 3 diameter lines up to 100ft. The heavy-duty frame is reinforced on both sides for added durability. The cable cage is powder coated to resist rust.

The Telpro PanelLift drywall lifter can be assembled or disassembled in seconds with no tools required. A tilting cradle brings the loading height down to a manageable 34 inches for easy installation of drywall to walls and to sloped or level ceilings up to 11 feet tall. A maximum load rating of 150 pounds ensures plenty of support for lifting all standard drywall sheets. The integral cradle ou...

Built to handle heavy lifting.

The original Vibra Strike I is ready to screed either wet or form to form. The Vibra Strike I and VSII are the only power screeds with our patented horizontal vibration that gives you a honeycomb free, first bull float finish as fast as you can pour! The 1.5 horsepower Honda/GX35 Engine has finely balanced rotating parts to give extra long life Megaflex cable housing and four 1-1/2 , 40 duromet...